- 08111234090
- senkiong@pcl.co.id
Soyal Finger Print AR-837-EF9DO
FEATURES
◎ Supports dynamic graphic control and timely jump to emergency events.
◎ Support for elevator scheduling control.
◎ Built-in 125KHz and 13.56MHz induction frequencies (EB: 125KHz induction frequency / ED: 13.56MHz induction frequency / ES: Built-in dual-frequency induction frequency of 125KHz + 13.56MHz)
◎ Built-in Door Bell button / Illuminated Keypad Design / Weatherproof
- Capacity to Built-in HID module and HID compilable
- Capacity to Built-in Voice module
- Built-in Door Bell button
- Illuminated Keypad Design for more visual operation
- Weatherproof Design for outdoor use
- High security Biometrics Device, the finger is the only key
- RS-485 and TCP/IP communication interface
- User capacity: 16,000; Event log: 32,000
- Fingerprint-User capacity: 4,500~9000 (2~1 fingers for each user)
- High recognition rate of fingerprint reader(FRR): <0.1%
- Fingerprint Sensor can option the Optical Sensor(DO) or the Capasitive Sensor(MT)
- Auth. Speed (1:N): 0.97Sec.(DO) / 0.65Sec.(MT)
- Access modes: Finger only, Card and Finger, Card or PIN and Finger, Card and PIN and Finger
- Built-in Watch Dog to prevent the halting
- 2 control modes: M4/ M8
- 63 auto-open zone settings and 16 sets of Auto-Open Zone editable
- WG port provides anti-pass-back function
- One more Exit Switch, Door Contact and Door Output to wiegand
- Built-in Multi-Output: Door Lock/ Alarm/ Arming/ Duress/ Security trigger signal
- SOYAL software support for networking
- Easily integrated with SOYAL or others access control system
- Work attendance check: Push buttons to select Duty on/off work, Leave/Back and Overtime on/off
- Built-in Real Time Clock & Anti-Tamper functions
- Flexible to integrate with other equipments
- 125kHz and 13.56MHz can be used simultaneously two channels
- Patent for new type of Relay, avoid vibrating to Mis-Trigger
- RS-485 serial output for various application and lift control
- Built-in 16 set of Alarm and 120 days of Holiday setting
- Menu setting with LCD panel
- Coordinating with softwares for further application on access control, time attendance, payroll, anddoor/sensor image-monitor function
- Auto-lock of the keypad for 30 seconds after continuous failed operation by 3 times
- Including the input of door contact, offering the alarm system of both door opening too long and beingforced to open
- Intelligent to shift for standalone or networking mode while system disconnected
- Support Fire buttons to make sure the fire happening, all doors open
- Supporting AR-721_RB Relay Output module alternates traditional relay module, raise security, resist from stealing, and avoid wrong operation.
Specification
Frequency / UID Bits / RF Reading Range
| S (Dual Band) | |||
| Frequency | 125kHz:
| ||
| UID Bits | 24~64 Bit (Adjustable) | ||
| RF Reading Range | 2-15 cm | ||
*MIFARE and MIFARE Classic, MIFARE DESFire, MIFARE Plus, MIFARE Ultralight are registered trademarks of NXP B.V.
RFID Crypto / Communication interface
| S (Dual Band) | |||
| RFID Crypto | CC Certification: AES Crypto comply with EAL5+ | ||
| Host | RS-485 (9600 bps) TCP/IP POE (Optional By Order) SSC (Soyal Security Communication) | ||
| Serial | TTL UART (4800~115200 bps) X1 (half-duplex) | ||
| Wiegand Input | Wiegand 26~64 | ||
| Wiegand Output | Wiegand Data 0, Data 1 and Arming Output, Duress Output share the same terminal | ||
*SSC (SOYAL SECURITY COMMUNICATION) :To enchance security of communication
DI/DO (Doors Control:2)
| Main Controller | Wiegand Output Port | |
| DI | Egress X1 Door Status X1 | Egress X1 Door Status X1 |
| Door Lock Output | Door Lock Relay X1 | Open Collector X1 |
| Alarm Output | Relay X1 | |
| Wiegand Port | — | Wiegand Data 0 Intput X1 Wiegand Data 1 Intput X1 Red LED Output X1 Green LED Output X1 Beeper Output X1 |
| Open Collect Output | Arming Output X1 | |
| Tamper | Limit switch (1 Form C/ 1000mA / 30VDC) | |
User Capacity / Floors Number / Event Log
| User Capacity / Floors Number | 16,000 Users/64 Floors (Default value)；32,000 Users/32 Floors；65,000 Users/16 Floors | ||
| Event Log | 32,000 | ||
Hardware Specifications
| Power Voltage | 12-24VDC | ||||
| Flash memory | Capacity 32Mb (The user data and event logs can be stored for more than 10 years after power off) | ||||
| RTC | RTC clock can be maintained for 14 days after power off, and the time error per week is within 1 minute (vary depending on the installation environment) | ||||
| CPU | ARM Cortex M3 (32 bits) | ||||
| Power Consumption | <5W | ||||
| Indicator | LED | 6 LED (Green/ Red) | |||
| Buzzer | 1 | ||||
| TAMPER | Limit switch/ 1 Form C/ 1000mA / 30VDC | ||||
| LCD Panel | 128*64 (4 line messages, 16 Characters each line) | ||||
| Housing Material | ABS (Fire-proof level: 94V0) | ||||
| Color | Edge: Black / Silver | ||||
| Keypad | lluminated Rubber | ||||
| Dimension (mm) | Roof Type | 128(H)X147(W)X73(D) | |||
| Standard Type | 128(H)X147(W)X65(D) | ||||
| Net Weight(g) | approx. 320 | ||||
| Ingress Protection | IP65 | ||||
| Environment | Operating Temperature | -20℃ ~ +70℃ | |||
| Storage Temperature | -40℃ to +75℃ | ||||
| Operating Humidity | 0%~90% (non-condensing) | ||||
| Storage Humidity | 0%~95% (non-condensing) | ||||
Fingerprint Specifications
| FP Sensor Type | Optical Sensor | ||
| FRR | <1% | ||
| Image Resolution | 500dpi | ||
| Fingerprint Capacity | 9000FP | ||
| Total Users with FP Capacity | 4500 User (1-2 fingerprints for each user) | ||
| Identification Speed (1:1000) | <0.7sec | ||
| Sensible Temperature | +30°C to +31°C | ||
PT Pratama Cipta Lestarindo
Komplek Gading Bukit Indah Blok SB No. 1
Jl. Bukit Gading Raya – Kelapa Gading – Jakarta 14240, Indonesia
Phone : (62-21) 29078858
WA : +62811 1234 090
Website : softwaredreampos.com
Email : senkiong@pcl.co.id
Share To :
© DreamPos 2025